Mail Me

Week 35, 1999 ,Svenson

Sjon




-- Links -- calendar -- Jobs to do --
-- Previous week -- Next week --


This is the past


1999-08-30

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Monday

It was quite misty and warm (13C) this morning. Most of the day was nice warm and kind of sunny but not bright. As if the mist has risen a few hundred meter and lingered there.


I finished and tested the last change for the Americans. I left a backdoor open in that program so we can easily hook any new requirements in with the minimum of fuss. There is just some more documentation to be done before the whole lot can be sent over. Tomorrow I will quickly fix the leak in the invoicing process. It should be fixable in half a day. But I am not pinning myself on a planning for it. Just ask Tom what happens if you work out a good plan or a quick fix.


Speaking of Tom, he somehow lost his daynote for Thursday. He knows he posted it but somehow it got lost. I know he posted it because I read it and it started with a mail from me about his Outlook acronyms. I proposed OPIUM (=Outlook Produced Incredibly Unproductive Moments) more as a joke than for real. But I am sure I read it. Now I checked all the page in the Netscape cache. And I could not find it. I found a lot of silly half filled pages, frames and backgrounds as well as a heap of graphics but no daynotes. Nothing from Tom nor from Robert Thompson or Jerry Pournelle nor from Bo Leuf. And I didn't find anything from Byte or CNN or some other local sites I visit every day. There were only 5 pages from the 26th and all were irrelevant backgrounds with (unfound) images. Just as if the 26th had just vanished. Weird.
I also checked the cache at home and I didn't find anything there either. That doesn't really surprises my, because I often just log on to upload my own page. Basically, the more I write on a day the less time I surf, and I wrote quite a lot on Thursday. Hey I am not a writer so that little bit was really a lot for me.


My brother called. He doesn't get sound out of Cindy . I tried it here before installing and it worked but I never remember which hole to use to plug in the speakers so that may be the problem or maybe I turned the volume down totally or muted the sound. I didn't try it after installing so it may really be a problem like a cable that came loose in transit. And Peter is not that used to Windows to know where to look first. Problem is he doesn't have a phone anywhere near the computer, somewhat the same situation I had until about four months ago. The sound is not really a problem so I explained what to check and he will try it later. Tomorrow he is of to work till next weekend so by Sunday I will know what the problem was. This is time lapse support. On my job I get problems that must be solved yesterday, from Peter I get jobs that must be solved sometime but please not immediately.


¨


1999-08-31

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Tuesday

Lots of small red lined clouds and a reasonable temperature (12C) this morning. Nice temperature but overcast all day.


When I got up this morning my right side felt numb. When I lay on my side I often wake with my arm or leg painful because the blood flow was cut off. Now my whole left side was numb and I had almost no peripheral vision from my left eye. The numbness disappeared after a few minutes and my vision cleared out after a few hours but I didn't feel well all day. I often suffer from a low blood pressure so I assume that is the reason.


We finished Patch-6 for TeleSales and sent it to the opco's. I finished off the documentation for the Credit card interface. I was not really productive today but given my condition I struggled along nicely.


I couldn't upload to the Mailbank server yesterday. I could read but only short pages, anything more than one screen full cancelled out. I uploaded to my Euronet site and, in an answer mail to Tom I mentioned that. First thing in the morning I got a mail from Tom proposing to put a link on his page so that other people would find my daybook. Amazing how fast one gets help from friends. Even without asking.
On the Mailbank member pages there was a notice that the servers had a problem, they are working on it. I'll try again this evening. If this sort of trouble persists I will move the day note pages permanently over to the Euronet server and keep only the less frequently changed pages at Mailbank. I haven't had any problem with their mail servers and that is the main reason I chose them. And why I will keep them.

But I am amazed and impressed at the way a community gets formed on the Web. About six months ago I had hardly surfed outside the company's intranet. And now I feel like being accepted as a member in a select group of people with much more experienced. This is not the Cool, Exciting, Profitable , < add your own expletive > Web as it is pictured in the media. This is the stuff of life. It grows in unexpected directions and it pulls in innocent victims to push them to new heights.
When I first published, a scant 4 months ago, I thought I could add something to the web. Now I know I added more than I even thought I possessed and I get back more than I can assimilate. This is what small kids must feel. They give more than they realise and they absorb new experiences every minute.

I am getting younger every day.

 

¨


1999-09-01

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Wednesday

Same weather and temperature (fine but overcast and 13C in the morning).


I started an finished the financial period adaptation for Germany, I kept testing for tomorrow. And the correction program will have to wait as well.


I am having trouble wit Yaku. When I try to copy or write a CD I get various errors or locks. When I reboot I often have to reboot two or three times before I get the copy program running again. I think this may be due to either a hardware problem, hardware can and does fail sometimes, or, more likely, some interference from an installation of Win98. The problem was that Win98 did hang on booting, immediately after loading the mouse driver. I suspect this has something to do with the PS/2 mouse port that is available on the motherboard but which doesn't work. Anyway I uninstalled Win95 and everything worked normally, even the CD writer. Later I installed the TCP/IP networking options and since then the box crashes. I copied all the content from the primary drive to the secondary and reformatted the first on again.
I will try to install everything from scratch.

At home I tried all the possible switch and jumper combinations but I couldn't get any new response from the Soyo main board. I am totally stuck here. I tried everything I know of and nothing works.
Next week I get a new processor (AMD K6-2/500) I will try that one. I am hopeful but not confident. This is taking way too long to get Aria running.


I uploaded Yesterday and, on first try at about 22h00 the Mailbank server was not co-operating, I got past the password exchange but then things got stuck. Browsing my own site was like surfing on mud. I uploaded to my mirror site at Euronet, tested it there and then surfed some more. Just before quitting for the day I tried Mailbank again and lo it worked.
And how.
They were about twice as fast as usual both in uploading and in surfing. Seems that their upgrade problems are solved.

 

¨


1999-09-02

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Thursday

Less clouds and cooler in the morning (11C) but more sun and warmer trough the day. Nice weather to be outside :-/


Did I say the Mailbank servers were back on line and faster than ever? Yep, I did say it and they were. But only for one day. I tried to upload yesterday and, after several attempts I could log on past the password. However I never reached further than sending the List command. After trying for about two hours I gave up and uploaded the lot to my Euronet account.

I'll try again this evening.

Why did I say they were back on line yesterday while they were not?
Well, I write the day notes on Harper , my main system and I upload from Miona. Now Harper is in my bedroom and has no connection to the outside world and I don't run the network upstairs yet. Miona is located on the attic and has the modem connection to the world but is not connected to any other box here. This is he result from a drawn out relocation process, all computer stuff is moving from the bedroom to the attic. By this time next year I think everything will be up. In the meanwhile I write the notes on Harper, save to a floppy, crawl up the attic, copy from the floppy to the E: partition on Miona (which houses the whole site) and then I (try to) upload to Mailbank. By then it is too late to go down, reedit, save, etc. etc. etc. to get back up and try again. If it works I should go and reedit again, if it doesn't work nobody sees my effort.

I could change the content the day later but I don't change my past pages on principle. I don't edit the past. If I made mistakes so be it, I may put a remark about past mistakes (ex broken links) on the current day but I do not correct the mistake in situ. One learns by analysing mistakes, not by erasing them.

Editing history is something for Politicians, not for Humans.


While testing the financial period program I caught some minor bugs, which I solved and I stumbled on a major 'feature'. The financial period, on the invoice header, is determined by the invoice date. This is the date the invoice is created ( as a record in the invoice file). But the printing program changes the financial period, using the current date. Normally the invoice is printed immediately after it is created so the invoice date equals the current date. However, nothing is always normal, when you are dealing with software, normal is a rather uncommon condition. So now I am not sure what the actual financial period (header level) should be based on.

The TeleSales patch we sent out yesterday was incomplete. The management tools had a limit of 100 reports and the patch contained 125 reports. Tom solved the problem and sent out a secondary shipment contains the missing reports.

We had a (long) meeting about the use of XML and HTTP servers. We should be using it soon but I will probably not get a chance to play and experiment with it. Time is the problem. As usual.


My blood pressure seems to be stable again. The dizziness is gone and my left eye is focusing normal again. If I can catch up on sleep I'll be fine. Catch up on sleep ? How do you do that?

I installed DR-DOS again on Yaku and I tried a clean install of Win98. Again. And with the same result. The stupid installation refuses to run on anything but "MS-DOS 3.2 or later".
On reflection this is really an intelligent installation program. It finds DR-DOS and realises that replacing this by Windows is not an Upgrade. And it quits . Probably the best program Microsoft distributes <g>.


¨


1999-09-03

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Friday

Glorious weather, starting at 10C with just 2 or 3 clouds and reaching an enjoyable 26C in the afternoon.


I started on the correction program for the financial period adaptation. And I finished the correction program for the missing invoice problem. The solution is even simpler than I first thought. Should be ready before Monday noon.

A new problem cropped up in TeleSales. The address change request procedure uses a file that is filled with at signs (@) for fields that don't change and normal values for fields that change. The @ has EBCDIC code '7C'hex. In Germany there is another code page active and the value is different. The AS/400 programs are compiled against the Dutch (international) code page so the always put '7C' in the file regardless of t he actually used code page. Characters sent from the PC are always converted according to the active code page. To make a long story short, TeleSales fills the right character but this is wrong Hex value when the AS/400 programs look at it. We solved it in an un elegant but safe and guaranteed way. Now TeleSales get the character from an AS/400 program uses that for its filling and testing. Result if it is right it is right, if it is wrong it is everywhere wrong in the same sense.

This is called a kludge.


I somehow lost the evening. It is now 22h45 and I cannot really tell what I did between dinner and now. I guess my body is signalling that I need to get some sleep.

I'll just upload and comply.

Fast connection and uploads to Mailbank at over 5000 bytes per second. Which is fast for me. (Hey Tom, if you just stop grinning. Will you.) The speed problem is not really my modem because that will handle more, it is now connected at 26.400 Bps while yesterday it ran at 34.000Bps, it is the servers at Mailbank or some box in-between that won't let the bits pass fast. So a big pipe, like Tom's, would probably change nothing here.

 

¨


1999-09-04

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Saturday

Ideal summer weather, clear and sunny, temperature rising from 10C to about 25C.


Shopping. I came home with a small 4+1 port Wisecom ethernet hub and an AMD K6-2/400 processor. I took the cheapest processor available because it is probably going to sit on a cupboard most of the time as a spare part. I am going to use it now for testing in Aria. I guess it is the last Socket-7 chip I buy. The hub will get used on the attic until I can move up my Palm-Hub, then it wil migrate down or move on to the stack of spares.


While trimming my beard the battery of the clippers died. I was using it from the mains but obviously the engine is always driven from the battery. The point is the machine died about halfway trough my beard leaving me totally asymmetric and even less attractive than usual. This of course happened late (about 21h00) so all the shops are closed and tomorrow is Sunday and I cannot arrive at work like this. I must check my brother, he also has a beard, and see if he has got one. I can use scissors if I have to, though it is not easy to cut your own beard with scissors .


I tried all the possible routes to get Aria working to no avail. That is, the Soyo mainboards don't work. One of them has both an ATX and an AT power connector. I tried it in the ATX case and in an AT case to no avail. I tried an Asus ATX board (from Miona) in the ATX case for Aria and that worked. I tried various processors and all of them worked on the Asus board but none worked on the Soyo boards. I don't believe the boars are defective. I returned the first one and got a new as replacement and I bought a second one. All three produce exactly the same problem. I think I will return the boards and get an other mark to try. Or I may ask the shop keeper to demonstrate how he gets the Soyos to work; he says they work fine.

Taken all together I think I lost about 5 days on this. And I lost money and self confidence. I am not sure that I learned something new.


Boss to one of his employees : You are the perfect candidate to work for the secret service.
Employee : Why ?
Boss : Because you never leave a trace of your work behind !


 

¨


1999-09-05

top
Mon
Tue
Wed
Thu
Fri
Sat
Sun
bottom

Sunday

The summer weather holds, about 2 degrees warmer then yesterday. That was 12C in the morning which is almost to warm for running.


The garden is getting a bit dry but the weeds don't seem to mind. I spent most of the day weeding, raking and hoeing.

And reading. I have been neglecting the magazines and they are slowly forming precarious heaps on the floor. When Byte stopped being printed I replaced it with PC Plus a good English magazine but now that Byte is back I should drop something. An other regular has been PC Magazine but while I am catching up on past issues (I am now scanning trough the April-6 issue!) I realise that it is not really interesting for me. It focuses too much on Microsoft products on the one hand and American market products on the other hand. The best are the columns from Machrone and Dvorak and Seymour. I must check their web site, if these columns are there as well I may well stop buying it. I will sure keep Computer Shopper (the UK publication has nothing to do with its US namesake) because these guys provide a typical dash of English humour in the otherwise serious articles.


I made a mistake. As I noted yesterday my beard clippers died halfway trough. My brother doesn't have one but my father (also bearded) has one so I used that.
However it has a different scale to select the cutting length. I used setting 2 and after a single pass noticed that this equals setting 1 on my machine. Setting 1 leaves about 4 mm while setting 2 leaves 8 mm, a huge difference. I tried to make the best of it but it remains visible that one side is trimmed shorter than the other. Not pretty but then that would be a surprise.

My beard is like weed, it grows fast. So it won't be long before I become recognisable again <g>


 

¨

-- Top -- Bottom --

-- Links -- calendar -- Previous week -- Next week --


Svenson © 1999

A day you don't learn something new is a wasted day.